News

Laser marking machine is a professional laser marking equipment integrating light, machine and electricity. Today, more and more attention is paid to copyright, it has become indispensable, whether it is used for manufacturing or DIY. In terms of personalization, it is loved in all walks of life. With the continuous expansion of market demand, the use of Fe/radium/Si laser marking machines in all walks of life is becoming more and more extensive. Because its price is relatively not cheap, its maintenance has also received attention from everyone.

After a laser marking machine is used for a period of time, if it does not pay attention to daily maintenance, its function is easily subject to a certain loss, which will directly affect the marking effect, marking speed and the life of the laser equipment. Therefore, we must regularly maintenance.

Daily maintenance

1. Check whether the lens of the field lens is dirty and wipe it with lens tissue;

2. Check whether the focal length is within the standard focal length range, and the test laser reaches the strongest state;

3. Check whether the parameter setting screen on the laser is normal, and the laser parameters are within the setting range;

4. Confirm that the switch is normal and effective. After pressing the switch, check whether it is powered on; whether the laser is working normally.

5. Whether the machine is normally turned on, whether the main switch of the machine, the laser control switch, and the switch of the laser marking system are normally turned on;

6. Clean the dust, dirt, foreign objects, etc. inside the equipment, and use a vacuum cleaner, alcohol and a clean cloth to remove dust, dirt and foreign objects;

Weekly maintenance

1. Keep the machine clean and clean the surface and interior of the machine;

2. Check whether the laser light output is normal, open the software and start manual marking for laser test.

3. To clean the laser field lens, first wipe with special lens paper dipped in alcohol in one direction, and then wipe with dry lens paper;

4. Check whether the red light preview can be turned on normally, the laser parameters are in the set range, and turn on the red light correction on the software to turn on the red light;

Monthly maintenance

1. Check whether the light path of the red light preview is offset, and perform red light correction;

2. Check whether the laser emitted by the laser is weakened, and use a power meter to test;

3. Check whether the lifting guide rail is loose, whether there is abnormal noise or oil seepage, clean it with a dust-free cloth and add lubricating oil;

4. Check whether the power plug and the connectors of each connecting line are loose, and check each connector part; whether there is poor contact;

5. Clean the dust at the air outlet of the laser to ensure normal heat dissipation. Clean dust, waste nodes and other foreign objects inside the equipment, and remove dust, dirt and foreign objects with a vacuum cleaner, alcohol and a clean cloth;

Semi-annual maintenance

1. Check the laser cooling fan, whether it rotates normally, clean the dust of the laser power supply and control board;

2. Check whether the moving shafts are loose, abnormal noise and smooth operation, clean with a dust-free cloth and add lubricating oil;

Precautions for the use of laser marking machine:

1. To prevent electric shock, do not operate with wet hands;

2. Please wear protective glasses when working to avoid strong light stimulation to damage the glasses;

3. Do not change specific system parameters at will without the permission of the equipment technician;

4. Special attention, it is forbidden to place your hands within the laser scanning range during use;

5. When the machine is improperly operated and an emergency occurs, press the power off immediately;

6. During the operation of the laser marking machine, do not put your head or hands into the machine to avoid personal injury;

*Tip: The maintenance process of the laser marking machine must be carried out by professionals. Non-professionals are prohibited from disassembling and maintaining the machine to avoid unnecessary losses or personal injury.