INCODE 355nm UV Laser Marking Machine
Product Configuration
Product Advantages
The focusing spot is extremely small, the processing heat effect is minimal, ultra-fine marking, special material marking, no thermal effect, and no material burning problem.
The light spot after the UV laser is focused can reach a minimum of 15μm, and the focused light spot is smaller, which can realize ultra-fine marking, and is very suitable for micro-hole drilling processing. Stable performance, long service life, environmental protection, no consumables.
Industry Application
The UV laser marking machine is mainly based on its unique low-power laser beam, which is especially suitable for the high-end market of ultra-fine processing, marking the surface of packaging bottles of cosmetics, medicine, food, UV plastic and other polymer materials, with fine effect and marking Clear and firm, better than ink coding and pollution-free; flexible pcb board marking and dicing; silicon wafer micro-hole and blind-hole processing; LCD liquid crystal glass two-dimensional code marking, glassware surface drilling, metal surface coating Marking, plastic buttons, electronic components, gifts, communication equipment, building materials, chargers, PCB board cutting, etc.
Sample Display
After-sales Maintenance
1. When the machine is not working, the power of the marking machine and the computer should be cut off. When the machine is not working, cover the field lens lens to prevent dust from contaminating the optical lens
2. When the machine is working, the circuit is in a high voltage state. Non-professionals should not repair it when it is turned on to avoid electric shock accidents.
3. If the machine has any fault, the power should be cut off immediately. If the equipment is used for a long time, the dust in the air will be adsorbed on the lower surface of the focusing
Low laser power will affect the marking effect; in severe cases, the optical lens will absorb heat and overheat and cause it to burst. When the marking effect is not good, the surface of the focusing mirror should be carefully checked for contamination. If the surface of the focusing mirror is contaminated, remove the focusing mirror and clean its lower surface. When removing the focusing lens, be careful not to break or fall; at the same time, do not touch the focusing lens with your hands or other objects. The cleaning method is to mix absolute ethanol (analytical grade) and ether (analytical grade) in a ratio of 3:1, infiltrate the mixture with a long-fiber cotton swab or lens paper, and gently scrub the lower surface of the focusing lens. The cotton swab or lens paper must be replaced once. During the working process of the marking machine, do not move the marking machine to avoid damage to the machine. Do not cover the marking machine or place other items on it, so as not to affect the cooling effect of the machine.
